Buyers may arrange the final payment for plastic handle full tang cutlery after an approved inspection, but this protection should be clearly written into the purchase contract. Huaqiang Metal supports factory and independent third-party inspections, including balance payment after inspection under agreed T/T arrangements. Payment should therefore follow the signed acceptance procedure, not be withheld without a contractual basis.
The safest payment decision is based on the acceptance clause in the purchase agreement. If final payment depends on inspection, the contract should identify the inspection party, inspection date, product criteria, required documents, acceptable tolerance, and procedure for handling defective or nonconforming goods. If these points are absent, delaying payment can itself become a contractual issue, even where the buyer has legitimate quality concerns.
The relevant flatware range can be produced with 410, 430, or 304 stainless steel for spoons and forks, while knife blades may use 420 stainless steel. Available finishes include silver, gold, and silver combined with gold. The designs can feature embossed floral handles, mirror-polished metal surfaces, and customized color-box packaging. Listed compliance information includes LFGB, FDA, BSCI, and ISO 9001.
A proper inspection should compare the delivered goods with the approved sample, drawings, and purchase specification. Inspectors should confirm the stainless steel grade, color, embossed pattern, polish quality, handle-to-metal connection, dimensions, packaging method, carton markings, order quantity, and visible defects. A general visual review alone may not identify material or assembly deviations.
According to the product information, every machine receives an appearance check before shipment. When a batch has confirmed quality problems, the stated solution may include free replacement or a refund. Customer complaints are reported to receive a response within 24 hours. Buyers should still document the issue with photographs, inspection records, affected quantities, and a comparison against the approved requirements.
Huaqiang Metal describes a quality system covering incoming raw materials, manufacturing, finished-product sampling, assembly, and final testing. Its listed records include BSCI and ISO 9001 certifications, together with ISO 14001, inspection certificates, SGS reports, TÜV SÜD reports, Bureau Veritas reports, and Eurofins food-contact-material testing.
The company reports experience serving discount supermarket groups, home-product retailers, cookware brands, furniture retailers, convenience stores, and importers in Europe, North America, South America, and other regions. Referenced programs include plastic-handle and half-tang cutlery for Lidl, ALDI Nord, ALDI Süd, Netto Marken-Discount, and b&m, along with full-tang cutlery and kitchen-tool projects for other retail customers.
| Payment or verification method | How buyers should apply it |
|---|---|
| T/T linked to inspection | The stated standard is a 30% deposit and a 70% balance against a copy of the bill of lading. A balance payable after third-party inspection can also be agreed. Put the condition in the contract. |
| Supplier pre-shipment inspection | The production process includes material checks, manufacturing control, assembly review, final testing, and pre-shipment appearance inspection. Ask for records and compare them with the approved specification. |
| Independent inspection | Factory audits and third-party inspections through SGS or Bureau Veritas are supported. This is useful when the buyer needs independent evidence before paying the balance. |
| Irrevocable L/C at sight | For bulk orders above USD 50,000, the stated payment options accept a 100% irrevocable L/C at sight. Documentary requirements should be agreed before issuance. |
| Nonconforming batch procedure | Follow the contract's replacement, refund, or correction process. Submit defect photos, inspection results, affected quantities, and shipment details to support the claim. |
No. Payment must follow the signed purchase terms. If inspection is a condition of the balance, schedule the agreed factory or third-party inspection and record the outcome before the payment deadline.
The report should address stainless steel grade, color, embossed decoration, mirror polishing, handle security, dimensions, packaging, quantity, labeling, and visible defects. The approved sample and technical specification should be the reference point.
Notify the supplier promptly and use the contract's nonconformity procedure. The stated product terms provide for possible free replacement or refund for batch quality issues, with customer complaints receiving a reported 24-hour response.
Delaying the final payment can be a reasonable risk-control measure when the purchase contract expressly makes payment dependent on inspection and defines the acceptance standard. Use the supplier's documented quality checks, commission SGS or Bureau Veritas when independent confirmation is important, and retain all inspection evidence with the order file. Huaqiang Metal supplies standard and customized OEM/ODM cutlery, supports mixed orders and packaging customization, and works with retail, hospitality, and importing customers. For technical assistance, contact eyas2018@126.com.
JIEYANG CITY HUAQIANG METAL INDUSTRY CO., LTD. is a stainless steel tableware and kitchenware manufacturer based in Jieyang City, Guangdong Province, China. Founded in 2006, the company states that it operates 16,000 square meters of production facilities with monthly capacity of 5,000,000 pieces. Its catalog includes full tang cutlery, colorful full tang cutlery, plastic handle full tang cutlery, half tang cutlery, and kitchen tools. The company lists BSCI and ISO 9001 certifications and serves customers in several industries and international markets.

REPORT