All Categories

Choosing Enclosure Materials and Mounting Methods for a Wall-Mounted Distribution Box

VIP-User
2026-11-17

Selecting the correct enclosure material and installation method is essential when specifying a wall-mounted distribution box. The JUNON V10 series 12-way model combines a 1.2 mm thick iron sheet metal base, a PC cover, pure copper busbars and terminal bars. Its documented installation method is flush mounting, allowing the box to sit within a prepared wall opening.

V10 Series Configuration at a Glance

The V10 distribution box is designed for applications that require an integrated wall installation. Its metal base provides the main enclosure structure, while the PC cover forms the front protective section. Pure copper busbars and terminal bars complete the stated internal distribution arrangement.

  • Metal enclosure base made from 1.2 mm thick iron sheet.
  • PC cover for the front section of the distribution box.
  • Pure copper busbars and terminal bars for the specified internal layout.
  • 12-way configuration for residential, commercial and other building projects.
  • Flush mounting for installation within a prepared wall recess.

Enclosure Materials and Internal Construction

The combination of an iron sheet base and PC cover provides the documented construction for the V10 series. However, the available product information does not define additional properties such as corrosion resistance, impact protection, ingress protection or outdoor weatherproof performance. These requirements should therefore be checked against the intended project environment and applicable specifications.

V10 series flush mounted distribution box with metal base and PC cover

Inside the box, the stated pure copper busbars and terminal bars are intended to support the product's distribution-box configuration. Before procurement, installers should verify that the available internal space and terminal arrangement are suitable for the planned conductors, protective devices and circuit layout.

Flush Mounting Requirements

The V10 is identified as a 12-way flush mounted distribution box. This method requires a correctly sized opening in the wall so that the enclosure can be positioned within the surface and aligned with the finished wall. Wall construction, recess depth, fixing points and access for wiring should be reviewed before installation.

12 way flush mounted distribution box installation structure

Current product information confirms flush mounting but does not confirm compatibility with surface mounting, adjustable recessed depths or alternative mounting accessories. A surface-mounted installation should not be assumed unless the supplier provides separate technical documentation.

Typical Application Environments

The documented application range includes residential projects such as apartments, villas, housing compounds, staff accommodation and student residences. The same distribution-box category is also listed for offices, shopping centers, hotels, restaurants and serviced apartments.

Additional sectors include public infrastructure, industrial facilities, municipal projects and overseas turnkey real estate developments. Cooperation records reference contractor-led building projects in the Philippines, Kenya, Ivory Coast, Kazakhstan, Uzbekistan and Sri Lanka, including hotel and building applications involving distribution boxes and switch sockets.

Specification and Verification Table

Item Documented V10 specification Checks required before ordering
Base and cover 1.2 mm iron sheet base with PC cover Review corrosion, impact and environmental performance requirements
Internal hardware Pure copper busbars and terminal bars Match the terminal arrangement to the planned wiring and devices
Installation method Flush mounting Confirm wall opening dimensions, recess depth and fixing details
Capacity 12 ways Ensure the number of circuits and protective devices can be accommodated
Quality controls 100% production-line inspection, laboratory sampling and incoming material inspection Request inspection records or supporting documents when required

Quality Background and Project Support

JUNON Electrical reports a High-tech Enterprise certificate covering switches and distribution boxes, together with an ISO 9001:2015 quality management system certificate. These credentials indicate the manufacturer's stated quality and technical framework, but they do not replace project-level confirmation of product dimensions, electrical ratings, installation conditions or local compliance requirements.

Frequently Asked Questions

What materials are used in the V10 distribution box?

The documented configuration includes a 1.2 mm thick iron sheet metal base, a PC cover, pure copper busbars and terminal bars.

Is the V10 designed for recessed wall installation?

Yes. The model is described as a 12-way flush mounted distribution box. The wall opening, installation depth and fixing arrangement should be confirmed before construction begins.

Can the box be installed on the wall surface?

The available information specifies flush mounting only. Surface mounting, alternative hardware and adjustable recess options require confirmation from the supplier.

Conclusion

For projects requiring an integrated wall installation, the documented V10 solution consists of a 1.2 mm iron sheet metal base, PC cover, pure copper busbars and terminal bars in a 12-way flush mounted distribution box. Confirm the circuit count, wall dimensions, environmental conditions and local electrical standards before placing an order. Guangdong JUNON Songtian Electrical Appliance Co.,Ltd operates an industrial chain supported by distribution and direct sales. The stated minimum order quantity is 500 pieces, with an estimated delivery period of 30–45 days. Technical enquiries can be sent to hayley@junlang.com.

About JUNON Electrical

Guangdong JUNON Songtian Electrical Appliance Co.,Ltd manufactures switches, sockets, distribution boxes and LED lights under the JUNON brand. Founded in 1983, the company operates a 148,000-square-meter factory and employs more than 30 engineers and designers. Its production capabilities include injection molding, punching, automated manufacturing and product testing. The company holds a High-tech Enterprise certificate and ISO 9001:2015 certification and serves customers across several application sectors.

Guangdong JUNON Songtian Electrical Appliance Co.,Ltd logo

REPORT

Code
Choose a different language
Current language: