Yes, double shot molding may need extra testing time before shipment, particularly when the tooling involves complex geometry or tight tolerances. Longterm indicates a delivery window of 35–45 working days for complex precision molds. During this period, the mold can undergo repeated trial cycles, shot-to-shot alignment checks, surface evaluation, and sample stability verification. These procedures help ensure reliable performance before the tool is released for shipment.
Double shot molding uses two injection stages within a single mold. Because the second material or color must register accurately with the first shot, the tool is run through multiple cycles to evaluate repeatability. These trials help verify part alignment, sample consistency, mold operation, and finished surface quality.
Pre-shipment validation may involve dimensional measurements, surface checks, mold running tests, and formal sample approval. For its custom precision plastic injection mold service, Longterm lists IQC incoming inspection, mold trial testing, dimensional inspection, and a full inspection before shipment.
The available mold configurations include single- and multi-cavity designs, optional hot runners, SPI or VDI surface finishes, and expected service lives from 50,000 to 1,000,000 shots. Since these specifications influence production conditions, the completed tool must be tested under representative settings before delivery.
One documented project involved eight sets of double shot overmolding molds supplied to a product brand in France. The project achieved accurate alignment and stable trial samples. This example illustrates why testing can continue until the molded parts satisfy the required dimensional, visual, and performance criteria.
Longterm Manufacturing Solutions Limited is certified to ISO 9001:2015 for the design, production, and sales of precision molds, as well as the sales of plastic products. The certification covers its global, EU, USA, Australia, Italy, and France markets.
| Project or inspection item | Available information |
|---|---|
| Complex double shot or overmold lead time | 35–45 working days for complex precision molds |
| Mold validation process | Repeated mold trials and mold running tests |
| Trial part approval | Stable sample production and sample confirmation |
| Dimensional control | CMM measurement, dimensional inspection, and final full inspection |
| Appearance control | Surface inspection with SPI or VDI finish options |
| Post-delivery service | Mold optimization, technical assistance, maintenance guidance, and spare parts support |
No. Testing time varies according to the tool structure, tolerance requirements, alignment accuracy, sample stability, and inspection findings. Longterm identifies multi-cycle trials as part of the process for complex precision molds, but simpler projects may require less validation time.
Typical checks include mold running tests, repeated double shot trials, dimensional inspection, CMM testing, surface evaluation, and sample confirmation. The listed process also includes IQC incoming inspection and a full inspection before shipment.
Longterm lists 35–45 working days for complex precision molds, including double shot and overmolding tools. Its separate custom precision plastic injection mold listing states a 20–35 day delivery period, with the final timing depending on project requirements.
Additional pre-shipment testing is normal for double shot molding because the manufacturer must confirm shot alignment, repeatable cycling, surface quality, dimensions, and sample performance. For complex tools, the stated lead time is 35–45 working days. Longterm provides precision mold design, custom mold manufacturing, injection molding development, and support through mass production. Its ISO 9001:2015 certification and documented French double shot overmolding project offer relevant manufacturing references. For technical advice or project support, contact rogerluo@longterm-mold.com.
Longterm Manufacturing Solutions Limited was established in 2010 and serves international customers with mold design, tooling, precision machining, mold production, and plastic parts manufacturing. The company has 50 employees and focuses on customers in North America, Europe, and Australia. Its capabilities include double shot molding and overmolding, supported by ISO 9001:2015 certification for precision mold design, manufacturing, and sales.

REPORT