The Edge Bander 4000mm is designed for automated panel-edge processing and includes electrical stability checks during factory inspection. However, the available product information does not identify a specific electrical safety certification or compliance standard. With a stated total power of 12.3 kW and working air pressure of 0.6 MPa, the machine should be reviewed against the installation site's electrical capacity and local regulations before purchase and commissioning.
The published specifications confirm the machine's main processing functions, including pre-milling, EVA glue application, end trimming, fine trimming, scraping, and buffing. They also mention electric lifting and a total installed power of 12.3 kW. Important supply details, such as voltage, phase, frequency, rated current, grounding requirements, and protective-device specifications, are not included.
The manufacturer describes electrical stability testing, control-program checks, precision calibration, and extended load operation as part of its inspection procedure. These factory checks can help verify operating performance, but they should not be treated as proof that the machine complies with a particular national or regional electrical safety standard.
The Edge Bander 4000mm supports edge strips measuring 0.4–3 mm thick and panels between 10 and 60 mm thick. Its minimum panel width is 60 mm, while the minimum panel length is 150 mm. The feeding speed is listed as 15–19 m/min. The machine measures 4000 × 700 × 1320 mm and weighs approximately 1000 kg.
These specifications make the equipment suitable for panel furniture manufacturing, custom home furnishing, and other production environments where finished panel edges require continuous treatment. Even so, mechanical capacity and production suitability do not determine whether the electrical installation is acceptable at a particular site.
To complete an electrical safety review, a buyer should obtain the machine's rated voltage, phase configuration, frequency, full-load current, wiring diagram, grounding method, and recommended upstream protection. Details about emergency-stop circuits, overload protection, control-panel safeguards, and isolation procedures should also be requested.
The supplier should additionally clarify which electrical tests were performed, provide available test records, and identify any declarations, certificates, or technical files applicable to the destination country. A qualified electrician or machinery-safety professional can then compare those documents with the site's supply system and workplace requirements.
Foshan Sun Hunt Woodworking Machinery Co.,Ltd. reports supplying 19 machines to a wood door factory in India and a 10-machine production line to a wood processing factory in the UAE. These examples indicate experience with production-line deliveries and customer applications, but the supplied case information does not verify electrical certification for the Edge Bander 4000mm itself.
| Review category | Published information | Additional confirmation required |
|---|---|---|
| Installed power | Total power is specified as 12.3 kW | Rated voltage, phase, frequency, and operating current |
| Factory inspection | Electrical stability and control-program checks are described | Test results, inspection scope, and referenced standard |
| Protection measures | Electric lifting is included in the configuration | Grounding, emergency-stop circuit, overload protection, isolation, and wiring information |
| Compliance evidence | No model-specific electrical certificate is identified in the supplied data | Relevant certificates, declarations, or technical documents for the destination market |
No. The documentation mentions electrical stability checks, but it does not name a recognized electrical standard or provide a certificate and complete electrical rating data for this model.
Ask for the rated voltage, phase, frequency, current, wiring diagram, grounding instructions, protective-device requirements, emergency-stop information, test reports, and any market-specific compliance documents.
Not on the basis of the supplied information. Factory testing and local installation approval address different parts of the assessment. The machine must be matched to the site's power supply and reviewed against applicable local rules by qualified personnel.
The Edge Bander 4000mm has a documented total power of 12.3 kW, and the manufacturer states that electrical stability is checked during production inspection. Nevertheless, the available data does not allow buyers to confirm compliance with common electrical safety requirements because it lacks complete supply ratings and model-specific certification evidence. Obtain the relevant technical documents and complete a site compatibility review before ordering or installing the machine. For documentation or technical assistance, contact Vincent Guo at vincent@fsshmachine.cn.
Foshan Sun Hunt Woodworking Machinery Co.,Ltd. develops and manufactures woodworking equipment in Lunjiao, Shunde, Foshan. The company describes approximately 30 years of industry experience, a 2,000-square-meter factory, and an output capacity of 50 medium-sized machines per month. Its product portfolio includes edge banders, CNC routers, double-end saws, planers, drilling machines, and panel saws.
REPORT