A physical prototype for a custom insulated cooler bag is typically ready in 3 to 5 working days. This is separate from manufacturing: production generally takes another 15 to 25 days once the artwork has been approved. To make the sample useful for review, confirm the bag’s dimensions, base depth, materials, closure and print details before sampling begins.
The prototype stage is the time to check the bag’s construction and appearance. The manufacturer says new designs are reviewed on a physical sample, with Pantone matching used during sampling. It also provides a 3D structural drawing for approval before printing plates are made.
Artwork approval starts the production schedule. Review the physical bag first, including its proportions, insulation, closure and print placement, then approve the final artwork. Allow 15 to 25 days for production after that approval.
This square-bottom design has side gussets and a folded base panel. Available dimensions range from 30 × 35 × 10 cm to 45 × 50 × 15 cm. Base depths of 10, 12 or 15 cm are listed; confirm whether the base depth should match the side gusset or be specified separately.
The standard construction uses an aluminium foil laminate outer layer, a 2–5 mm closed-cell EPE foam core and a food-grade PE sealant contact layer. An air-bubble core is available on request. The standard closure is a flat seal, while a slider zip or tear notch can be requested. A moulded handle is sealed into the top band.
Before requesting a sample, provide the target dimensions and base depth, insulation choice, closure, handle requirements, colour and print coverage. Printing can extend across the front, back and both side gussets. If the bag is intended for hot-food delivery or grocery cold-chain use, include the application when discussing the construction.
| Item | Available information | Confirm before proceeding |
|---|---|---|
| Physical sample | 3 to 5 working days | Dimensions, base depth, materials, closure, handle and print |
| Bag structure | Square bottom, side gussets and folded base panel | Whether base depth follows the gusset or is specified independently |
| Insulation and layers | 2–5 mm EPE foam, foil laminate outer and food-grade PE contact layer | Core selection and intended use |
| Manufacturing | 15 to 25 days after artwork approval | Final artwork and order specification |
The company reports incoming-material, in-process and pre-shipment inspections under its ISO 9001:2015 quality management system, with AQL sampling for finished products. Samples may also be sent to a laboratory selected by the buyer if additional verification is needed. Its listed certifications include ISO 9001:2015 and FSC Chain of Custody.
A separate cold-chain insulated mailer project for a US distributor involved reported annual orders of 10 million pieces. The customer noted less heat transfer and lower storage and shipping space requirements than with rigid foam packaging. That example concerns a mailer, not the prototype schedule for this square-bottom bag.

Allow 3 to 5 working days for a physical sample. Manufacturing is a separate stage and typically takes 15 to 25 days after artwork approval.
Specify the bag dimensions and base depth, insulation core, closure, handle, colour and print coverage. Custom orders commonly begin at 5,000 to 10,000 pieces, depending on the size and construction. The exact minimum order quantity is confirmed for each project.
The company states that new designs are approved using a physical bag. Sampling includes Pantone matching, and a 3D structural drawing is provided for approval before printing plates are cut.
Set aside 3 to 5 working days for sampling, then evaluate the physical bag against the agreed dimensions, base depth, insulation, closure and print. Approve the artwork only after the sample review; the subsequent production period is 15 to 25 days. Huizhou Ecopack Packaging Products Co., Ltd. describes itself as a manufacturer and exporter with in-house R&D, printing, lamination, bag making and inspection. For a specification-based quotation or technical assistance, contact manager@ecopack.com.
Huizhou Ecopack Packaging Products Co., Ltd. is a flexible packaging producer established in Guangdong, China, in 2011. Its products include insulated packaging, custom pouches, coffee bags, pet food packaging and spout pouches. In-house capabilities cover structural design, printing, lamination, bag production and inspection, and the company reports shipping to more than 40 countries. Its listed certifications include ISO 9001:2015 Quality Management System and FSC Chain of Custody.

REPORT