All Categories

How to Document Defective Injection Mould Parts for a Warranty Claim

VIP-User
2026-11-17

A well-prepared warranty claim for defective injection mould parts should provide enough traceable information for the supplier to identify the mold, verify the reported problem, and determine the appropriate corrective action. The submission should combine mold and production details with inspection results, photographs, approved samples, and a clear request for resolution.

Essential Warranty Claim Information

  • Record the mold number, affected component, production batch, quantity, and exact defect location.
  • Explain the defect with objective evidence, including dimensional readings, surface inspection results, and comparison with the approved sample.
  • Include mold trial documentation, running records, pre-shipment inspection reports, photographs, and related technical correspondence.
  • Specify the expected remedy, such as troubleshooting support, maintenance instructions, replacement parts, repair, or mold modification.

How to Build a Traceable Defect Record

The claim should establish a direct connection between the defective injection mould parts and the mold or production process that created them. Begin with the mold identification and part application, then describe what failed, where the failure appears, and which inspection method confirmed it. This structure helps the technical team review the issue against the original quality records.

Link the Claim to the Mold Specification

When the claim concerns a custom double shot overmolding mold, include the relevant design and performance specifications. These may include the two-color injection arrangement, compatibility with hard and soft material combinations such as ABS+TPU or PP+TPE, precision alignment, optional multi-cavity construction, 718H or 1.2738 mold steel, and a stated service life of up to 800,000 shots. Only specifications related to the reported issue need to be highlighted, but they should be referenced when they help explain the defect.

Use Inspection and Trial Evidence

Supporting records should follow the quality process used for the mold. Attach mold trial results, dimensional inspection data, and pre-shipment inspection findings. If the service process included first article inspection, complete dimension measurement, mold running tests, or sample approval before shipment, identify those records and explain any difference between the accepted sample and the later defective part.

Document Visual and Dimensional Problems Clearly

For surface defects, flash, short shots, marks, or alignment concerns, provide clear photographs showing the affected feature and its position on the part. For dimensional nonconformities, state the measured value, tolerance, drawing reference, or approved sample reference. Also indicate whether the problem was first observed during mold trials, sample confirmation, or subsequent mass production.

Longterm Mold has experience producing electronic housings, double shot overmolding molds, home appliance components, and industrial plastic parts. Reported projects include an Italian handheld device part, a French consumer electronics shell, a US home appliance component, and an Australian industrial equipment housing. These applications involved requirements for dimensional accuracy, surface finish, alignment, stable trial samples, technical problem solving, and dependable delivery.

The company is certified to ISO 9001:2015 under certificate number 02825Q12549R0S. The certification covers the design, manufacture, and sale of precision molds, as well as the sale of plastic products.

Custom double shot overmolding mold for injection mould parts

Warranty Documentation Checklist

Required RecordWhy It Matters
Mold and part identificationConnects the reported defect with the supplied mold, component, application, and production batch.
Defect description and photographsShows the visible condition, affected area, and features requiring technical investigation.
Dimensional inspection resultsOffers measurable evidence for comparison with the drawing, tolerance, specification, or approved sample.
Mold trial and running recordsIndicates how the mold performed during testing and when the issue may have appeared.
Pre-shipment inspection and sample approvalProvides the baseline used to compare the defective parts with the condition accepted before shipment.
Requested corrective actionClarifies whether the customer needs technical advice, maintenance support, spare parts, repair, or mold modification.

Frequently Asked Questions

What should be submitted with a claim for defective injection mould parts?

Provide the mold and part identifiers, production information, defect explanation, photographs, dimensional test results, mold trial records, pre-shipment inspection documents, and the approved sample or sample confirmation when available.

How should a dimensional defect be presented?

Identify the affected feature, list the actual measurement and applicable tolerance, and cite the drawing or approved sample used for comparison. Include the result of the relevant full-dimension measurement or dimensional inspection.

What corrective support can be requested?

Depending on the applicable service arrangement, the requested response may include online technical support, mold maintenance guidance, spare parts, warranty-period repair, or mold modification and optimization assistance.

Conclusion

A strong warranty claim combines traceable mold and part data with verifiable defect evidence. Dimensional records, trial results, inspection reports, approved samples, photographs, and a specific corrective request allow the supplier to review the issue efficiently. Longterm Mold provides OEM custom plastic injection molds, custom mold making with injection molding, precision double shot and overmolding molds, and mold development supported by plastic injection mass production. For technical solutions or service support, contact rogerluo@longterm-mold.com.

About Us

Longterm Manufacturing Solutions Limited, operating under the Longterm Mold brand, was founded in 2010 and provides mold design, tooling, precision machining, mold manufacturing, and parts production. The company has 50 employees and 5 R&D engineers who work on injection mold structural design, precision CNC component solutions, sample verification, and manufacturing process optimization using UG, SolidWorks, and AutoCAD. Its main markets are North America, Europe, and Australia, and its products include injection molds, rapid prototyping and precision parts, and automated production solutions. The company holds ISO 9001:2015 certification and has served clients across multiple industries.

Longterm Manufacturing Solutions Limited logo

REPORT

Code
Choose a different language
Current language: