How to Document Furniture Aluminum Extrusions for Green Building Projects

Furniture aluminum extrusions may be included in green building project records when the product data and environmental claims are supported by suitable documentation. The available information identifies MEBEL-ALU aluminum tile trim, skirting, and edge profiles as 6063 T5 aluminum products. However, it does not provide an Environmental Product Declaration, recycled-content percentage, life-cycle assessment, or product-specific green-building certification. These records should be obtained and verified before any environmental benefit is claimed.

Key Findings for Project Teams

• The documented product consists of aluminum tile trim profiles, also referred to as aluminum skirting and edge profiles.
• The stated material designation is 6063 T5.
• No recycled-content data, environmental declaration, life-cycle assessment, or green-building certification is included in the supplied product information.
• The profiles may serve high-end cabinet and door manufacturers, furniture wholesalers, hotels, and residential developers.
• Project records should clearly separate confirmed technical information from environmental evidence that remains unavailable.

What the Available Documentation Confirms

The current product information verifies the profile category and the 6063 T5 aluminum specification. This is useful for identifying the material and product type in architectural schedules, furniture specifications, and procurement records. It does not, by itself, demonstrate the product's recycled content, embodied carbon, manufacturing energy consumption, environmental impacts, or eligibility for a particular green-building credit.

The company profile describes internal capabilities for aluminum extrusion and finishing, including anodizing, brushing, mechanical polishing, and CNC machining. It also reports a monthly output of approximately 5,000 tons of aluminum profiles and 60,000 precision-finished handles and CNC precision-cut products. These figures indicate production capacity and processing capability, but they should not be treated as evidence of environmental performance.

Records Needed for Environmental Claims

Before submitting the product for a green building assessment, the project team should request current, product-specific environmental documents from the supplier. The records should correspond to the exact aluminum profile, alloy, manufacturing route, surface treatment, and finish being specified. Depending on the applicable rating system and project requirements, useful evidence may include an Environmental Product Declaration, life-cycle assessment, verified recycled-content statement, material health documentation, or an applicable environmental certification.

Mebel-Alu lists a Quality Management System Certificate, 00224Q22942R5M, and an Occupational Health and Safety Management System Certificate, 00225S21748R1M. The stated scopes relate to aluminum alloy profile production and management systems. Based on the supplied information, neither certificate is identified as an environmental product certification or as proof of green-building compliance.

Documentation Status Comparison

Frequently Asked Questions

Does the 6063 T5 specification show that the product is environmentally preferable?

No. The designation identifies the aluminum alloy and temper, but it does not disclose recycled content, embodied carbon, life-cycle impacts, or certification status.

Can the company’s management certificates support a green-building submission?

They may document quality and occupational health and safety management systems. The supplied scopes do not identify them as environmental product certifications, so they should not be used alone to substantiate environmental claims.

What should be requested from the supplier?

Request current documentation for the exact profile and finish, such as an EPD, LCA, verified recycled-content statement, or other records required by the project’s rating system. Confirm the document’s validity, scope, and product coverage before submission.

Conclusion and Practical Recommendation

Furniture aluminum extrusion can be documented for a green building project, but technical identification and environmental qualification are separate requirements. For the listed MEBEL-ALU 6063 T5 aluminum tile trim profile, the available information confirms the product type, alloy designation, and manufacturer capabilities. It does not establish environmental performance or eligibility for a specific green-building credit. Mebel-Alu Furniture Profile (Hong Kong) Co., Ltd has operated since 2008 and identifies furniture aluminum profiles as a primary product category. For product-specific technical records, contact mebel@mebel-alu.com.

About Mebel-Alu

Mebel-Alu Furniture Profile (Hong Kong) Co., Ltd has specialized in precision-engineered aluminum profile systems for modern interiors since 2008. Its product range includes glass door systems, sliding wardrobe systems, kitchen cabinet frames, and decorative tile trims. The company describes in-house extrusion, surface finishing, and CNC machining operations, along with a 300,000-square-meter factory area. Its stated monthly capacity is 5,000 tons of aluminum profiles and 60,000 precision-finished handles and CNC precision-cut products. Listed credentials include a Quality Management System Certificate and an Occupational Health and Safety Management System Certificate.