Preparing the warehouse before LCD Separators or related electronic repair equipment arrive helps prevent damage, delays, and stock confusion. Set up a clean, dry, well-organized receiving area with protected power outlets, adequate shelving, and enough room to open cartons and inspect each product. For the BA-937C soldering station, retain the original packaging until the inspection is complete and protect all units from moisture, dust, impact, and excessive pressure.
A practical warehouse layout should guide products through a defined sequence. First, move incoming cartons to a receiving zone where staff can check the shipment condition, quantities, and labels. Next, transfer unopened units to the inspection area for functional testing. Products that pass inspection can then be assigned to approved inventory, while exceptions should remain in a clearly marked hold area.
The BA-937C has dimensions of 225 x 194 x 105 mm and a net weight of 1 kg. Shelving must therefore offer enough load capacity and clearance for safe lifting, carton movement, and visual checks. Avoid stacking arrangements that could crush the packaging or place unnecessary weight on the equipment. Keep aisles unobstructed so staff can move products without striking cartons or other warehouse fixtures.
The inspection point should include a stable, clean workbench, suitable electrical outlets, product records, and a designated location for units awaiting evaluation. The area should remain separate from packing waste and unnecessary dust. Staff can verify the product identity, appearance, accessories, quantity, and operating condition before accepted units enter regular stock.
The soldering station operates at 120 W, produces a noise level below 45 dB, and supports an iron temperature range from 200 to 500 degrees Celsius. These specifications are primarily relevant during functional testing and use, but the warehouse should still provide a safe electrical connection and sufficient working clearance for inspection.
Application-based labeling can make picking and replenishment more efficient. Separate stock groups may be created for mobile phone and tablet repair, laptop and computer circuit board repair, and electronics education or laboratory training. This approach helps warehouse teams select the correct equipment for each order and reduces allocation mistakes when several repair products are stored together.
After testing, keep the original packaging with each unit whenever possible. The packaging provides additional protection during internal transfers, customer delivery, and future storage changes. Labels should identify the product model, inspection status, quantity, and intended stock category.
BAKU supplies standard products from stock for wholesale orders and supports OEM and ODM customization. The company describes its production capability as including standard workshops, multiple assembly lines, and flexible manufacturing arrangements for high-volume purchases, small trial orders, and customized requirements. Its product range includes soldering stations, solder flux, solder paste, screwdrivers, and ultrasonic cleaners.
Certifications listed for its soldering stations include CE for the European Union, FCC for the United States, and RoHS. Reported supply applications include mixed repair-tool orders for a mobile phone repair shop in the Philippines, vocational training equipment in Malaysia, distribution orders in Saudi Arabia, and laptop repair workshop equipment in Mexico.
| Warehouse Factor | Suggested Preparation |
|---|---|
| Environment | Maintain a clean, dry, orderly area protected from moisture, dust, and impact. |
| Storage capacity | Use shelving or protected floor positions suitable for 225 x 194 x 105 mm cartons and 1 kg units. |
| Receiving flow | Separate newly arrived, pending inspection, approved, and held inventory. |
| Functional testing | Provide a clean workbench and safe electrical access for checking 120 W soldering stations. |
| Stock labeling | Identify products according to repair, training, wholesale, or distribution requirements. |
Yes. Keeping the soldering station in its original packaging reduces the risk of impact during receiving and internal handling. Check both the carton and the product before moving accepted units into long-term storage.
Each BA-937C measures 225 x 194 x 105 mm and weighs 1 kg net. In addition to the product footprint, allow clearance for lifting, carton opening, inspection, and safe movement. The required total space will depend on the number of units and the selected shelving system.
Prepare a clean work surface, a suitable power connection, order and product records, and a separate holding position for untested products. The inspection should confirm that the received model, quantity, accessories, appearance, and basic functions match the purchase requirements.
Before LCD Separators or other electronic repair equipment arrive, establish a dry receiving zone, protected storage positions, a controlled inspection workflow, and clear inventory labels. For the BA-937C, plan around its 225 x 194 x 105 mm size, 1 kg net weight, 120 W power rating, and 200 to 500 degree Celsius iron temperature range. BAKU states that it performs full-function testing before shipment, offers standard products from stock, supports OEM and ODM projects, and generally lists a delivery period of 7 to 15 days. CE, FCC, and RoHS certifications are listed for its soldering stations. For technical guidance or product support, contact hanker002@bakutool.com.
Guangdong BAKU Technology Development Co., Ltd. was established in 2003 and focuses on professional tools for electronic device repair, covering more than thirty product categories. Its independent R&D laboratory includes structural, hardware, and testing engineers and supports ID design, structural development, PCB debugging, and reliability evaluation. The company owns 25 design patents, serves customers in multiple industries, and reports that approximately 90% of its products are exported, with key markets in South America, Europe, and Southeast Asia. CE and FCC certifications are listed for its soldering stations.

REPORT