All Categories

How to Select the Correct Terminals for a Brazil-Standard Switch and 20A Socket

VIP-User
2026-11-19

Choosing terminals for a Brazil-standard switch and a 20A socket requires more than matching the nominal voltage. The terminal arrangement, acceptable conductor size, current rating, and local compliance must all correspond to the exact product documentation. The available listing identifies a UW series two-gang switch with an LED indicator, rated 10AX at 250V. It does not confirm Brazil-standard approval, 20A socket performance, or terminal dimensions, so these points must be checked separately.

Important Selection Points

  • The listed two-gang switch should not be treated as a Brazil-standard device or as a substitute for a 20A socket. Its stated rating is 10AX, 250V.
  • Before wiring, review the manufacturer’s circuit diagram, terminal markings, permitted conductor range, and maximum rated current.
  • Switch and socket specifications are different. The supplied information describes a switch and does not define a 20A socket or a combined switch-and-socket unit.
  • Although JUNON identifies residential and commercial projects as application areas, the available information does not verify compliance with Brazil-specific installation standards.

How Terminal Compatibility Is Determined

Terminal selection must follow the actual device design and its marked electrical specifications. The product information available for the UW series identifies a two-gang switch with an LED light and a 10AX, 250V rating. However, it does not include a terminal layout, terminal construction details, conductor capacity, or a Brazil-standard reference. These specifications cannot be reliably inferred from the product name or voltage alone.

When the installation includes a 20A socket, the socket must be identified by the manufacturer as a 20A-rated product. Its terminals must also accommodate the conductor type and size required by the circuit. Since the supplied product record concerns a switch rather than a socket, it cannot be used to confirm suitability for a 20A outlet. Obtain the exact socket datasheet and verify the applicable local requirements with the manufacturer or a qualified electrician.

Review Standards and Supporting Documentation

JUNON describes its products for settings such as apartments, offices, hotels, and retail buildings. These general use cases do not demonstrate approval for a particular national standard. The listed certifications include CE for switches under LVD22-9194 and CB for 13A sockets under CN42895. Based on the supplied details, neither record confirms Brazil-standard compatibility or a 20A socket rating.

JUNON’s cooperation references also mention building projects involving distribution boxes and switch-socket products in various countries. No Brazil-specific project or terminal specification for the device in question is identified in the available records.

Specification Review Before Purchase

Item to verifyInformation currently availableRequired next step
Two-gang switch rating10AX, 250VConfirm that this rating and the switch configuration suit the intended circuit.
Brazil-standard approvalNo confirmation providedRequest documentation identifying the relevant standard and market approval.
20A socket capacityNot stated; the listed item is a switchChoose a separately documented 20A socket and check its markings and datasheet.
Terminal arrangement and conductor rangeNot suppliedFollow the official wiring diagram and terminal markings rather than estimating capacity.

Frequently Asked Questions

Can the listed UW switch be used for a 20A socket circuit?

The listing describes a 10AX, 250V two-gang switch. It does not identify the product as a 20A socket or prove that it is suitable for a 20A outlet circuit.

Are the terminals verified for Brazil-standard wiring?

No. The available record does not provide a Brazil-standard designation, terminal drawing, or conductor-size range. These documents should be requested before selecting or installing the device.

Which technical details should be confirmed?

Check the product label, wiring schematic, terminal markings, permitted conductor size, rated current, certification information, and local installation requirements. The supplied record does not provide these details for a Brazil-standard 20A socket.

Conclusion and Practical Recommendation

Do not choose terminals for a Brazil-standard switch and 20A socket solely from the available UW switch listing. The listing confirms only a 10AX, 250V switch and does not establish Brazil compatibility, 20A socket performance, terminal configuration, or conductor capacity. Select the exact switch and socket models, then compare their labels and technical documents before installation. Guangdong JUNON Songtian Electrical Appliance Co., Ltd. produces switches, sockets, distribution boxes, and LED lights. Its stated quality controls include production-line inspection, laboratory sampling and testing, and incoming-material checks. For product clarification, contact Hayley Liao at hayley@junlang.com.

About JUNON

Guangdong JUNON Songtian Electrical Appliance Co.,Ltd manufactures switches, sockets, distribution boxes, and LED lights under the JUNON brand. The company reports standardized processes from product development through finished-goods production. Established in 1983, it lists approximately 2,000 employees and a factory covering 148,000 square meters. Its published credentials include CE certification for switches and CB certification for 13A sockets, while its cooperation records include building projects across several countries.

Guangdong JUNON Songtian Electrical Appliance Co.,Ltd logo

REPORT

Code
Choose a different language
Current language: