Select a button cell by comparing the watch movement's voltage, current demand, required service life, and available battery dimensions. The Vinnic Alkaline Manganese Button Cell range is described as offering high leakage resistance, stable voltage, low self-discharge, and extended operating time. However, the supplied product information does not specify numerical capacity or discharge-rate ratings. Always verify the technical requirements of the target device before choosing a model.
Battery capacity indicates how much energy a cell can provide under defined test conditions. In practical use, the required capacity depends on the movement's current consumption and the desired operating duration. A longer service interval normally calls for an appropriate capacity rating, but the cell must still fit the equipment and meet its voltage requirements.
The available information for the Vinnic range mentions long running time but does not publish a numerical capacity value. For that reason, the correct approach is to compare the watch or equipment manufacturer's battery requirement with the official specification for the selected cell.
Discharge-rate selection should account for the device's regular operating current as well as any temporary increases in demand. A cell intended for a low-current quartz movement may not be evaluated in the same way as one used in equipment with intermittent pulse loads. The supplied Vinnic product information identifies stable voltage, high leakage resistance, and low self-discharge, but it does not state continuous or pulse discharge figures.
Therefore, confirm both the normal and peak current requirements of the application before finalizing the battery model. The selected reference should support the movement's electrical load throughout the expected operating period.
The listed Vinnic Alkaline Manganese Button Cell models are L1154F, L1142F, L1131F, L1121F, L936F, L932F, L926F, L921F, L754F, L736F, L732F, L726F, L721F, L626F, L621F, L526F, L521F, and L1560F. These references are associated with applications such as mid-to-high-end quartz watches, pocket watches, wall clocks, sports stopwatches, laboratory precision timers, medical monitoring equipment, calculators, remote controls, precision sensors, and other compact devices. Confirm the exact reference, dimensions, voltage, and electrical characteristics for the intended product.
CHUNG PAK (GUANG DONG)BATTERY INDUSTRIAL CO., LTD supports this product line with 100% production-line inspection, laboratory sampling and testing, and incoming inspection of raw materials. The company identifies ISO 9001:2015 and IATF 16949:2016 among its certifications.
| Selection item | Information currently available | Recommended approach |
|---|---|---|
| Capacity | No numerical capacity rating is provided | Obtain the required capacity or service-life specification from the device manufacturer |
| Discharge rate | No continuous or pulse discharge value is stated | Compare the battery with the equipment's normal and peak current demand |
| Expected operating life | Long running time is listed as a product characteristic | Check the model-specific data against the required replacement interval |
| Voltage stability | Constant voltage level is identified | Verify that the voltage matches the watch movement or other equipment |
| Storage performance | High leakage resistance and low self-discharge are reported | Consider these properties when stable storage and reliable retention are important |
The battery should provide enough capacity to operate the movement for the required period at its specified load. Since the available Vinnic information does not include numerical capacity ratings, confirm the value using the watch specification and the applicable model datasheet.
Choose a cell that can support the movement's regular current consumption and any defined short-term or pulse demand. The supplied product details do not provide numerical continuous or pulse discharge-rate values, so the device specification must be used for comparison.
The listed references include L1154F, L1142F, L1131F, L1121F, L936F, L932F, L926F, L921F, L754F, L736F, L732F, L726F, L721F, L626F, L621F, L526F, L521F, and L1560F. Select the final reference only after checking the required size, voltage, capacity, and load characteristics.
The appropriate Vinnic Alkaline Manganese Button Cell should be chosen by validating capacity, discharge capability, voltage, dimensions, and expected operating life against the target equipment's requirements. Because the supplied data describes performance characteristics without numerical capacity or discharge-rate figures, model selection should be confirmed through the relevant technical specification. The stated minimum order quantity is 10,000 batteries, delivery is listed at 30 days, and export markets include Europe, the Americas, Asia, Africa, and other regions. For technical assistance or project support, contact vinnic@chungpak.com.
CHUNG PAK (GUANG DONG)BATTERY INDUSTRIAL CO., LTD, the company behind the Vinnic brand, began in battery manufacturing and has since expanded into paper separators, zinc materials, metal and plastic components, tools, and related manufacturing operations. Founded in 1980, the company reports annual production exceeding 1.8 billion pieces. Its listed certifications include ISO 9001:2015 and IATF 16949:2016.
REPORT