Insulation Requirements for a Detachable Container House Used All Year

Determining the correct insulation thickness for year-round occupancy requires more information than the supplied product dimensions. The available specifications confirm an external size of 5.95 m × 3.0 m × 2.896 m and a clear internal height of 2.6 m, but they do not identify the insulation material, thickness, thermal conductivity, or regional design target. These details should be obtained from the manufacturer before the unit is approved for permanent seasonal use.

Key Findings for Year-Round Applications

• The current product data does not provide a fixed insulation thickness.
• Insulation must be selected according to the climate, intended occupancy, building envelope, and required indoor temperature.
• The standard detachable container house is 5.95 m long, 3.0 m wide, and 2.896 m high externally, with 2.6 m of clear interior height.
• Reported application areas include construction camps, worker accommodation, project offices, emergency housing, tourism developments, and rural villas.

How to Evaluate the Thermal Design

A building’s insulation requirement cannot be calculated from its length, width, and height alone. The complete envelope must be reviewed, including the wall panels, roof, floor, doors, windows, joints, and any areas that may create thermal bridges. The manufacturer has not supplied a specific insulation system or thermal rating for this model, so selecting a thickness without further technical data would not be reliable.

Year-round performance also depends on the local climate and operating conditions. A unit intended for a cold region may require a different envelope solution from one installed in a hot, humid, or desert environment. The technical request should therefore identify the destination country or climate zone, expected occupancy, heating and cooling requirements, and whether the unit will be used as accommodation, an office, or another facility.

Configuration and Product Information

The product can be supplied in standard and optional configurations. Besides the standard 5.95 m × 3.0 m × 2.896 m external dimensions, the listed options include 4 m × 3 m, 6 m × 2.4 m, 7 m × 3 m, and a 12 m extended double-combination unit. Because each configuration changes the surface area and enclosure layout, the selected size should be stated when requesting the insulation proposal.

The manufacturer reports research and development activity in structural optimization, installation efficiency, and weather-resistance technology. Its stated capabilities include raw-material development, enclosure modal analysis, structural fatigue-life testing, and airtightness testing. These resources may support a suitable year-round design, but the supplied records do not include a product-specific insulation thickness, U-value, R-value, or thermal test report.

Quality information lists factory self-inspection and a one-year warranty, excluding damage caused by people. The company also reports CE certification for modular container house products, including detachable, flat pack, folding, and expandable models. The stated certification coverage includes the EU, Australia, North America, South America, Southeast Asia, and the Middle East.

Project Reference and Its Limitations

A project in an Indonesian coal-mining area reportedly used 2,000 sets as dormitories for mining workers. This example indicates that the product has been deployed at a substantial project scale. However, it does not disclose the insulation thickness, thermal resistance, indoor temperature target, or climate-performance test results, so it should not be treated as proof of a specific year-round insulation specification.

Information to Confirm Before Ordering

Frequently Asked Questions

Does the product specification state an insulation thickness?

No. The available record provides dimensions, optional sizes, quality information, and warranty terms, but it does not specify the thickness or type of insulation.

Can the required thickness be calculated from the container dimensions?

No. External dimensions define the size of the module, not its thermal resistance. The required insulation depends on the climate, envelope construction, indoor conditions, and applicable building standards.

What should be included in a technical inquiry?

Identify the selected unit size, installation location, climate, intended use, occupancy level, and year-round heating or cooling expectations. It is also advisable to request wall, roof, floor, door, and window specifications, along with thermal and weather-resistance test data.

Conclusion and Recommended Next Steps

The supplied information is not sufficient to name a defensible insulation thickness for all-season use. Before placing an order, request a complete envelope schedule covering the walls, roof, floor, doors, windows, joints, and airtightness performance. The manufacturer should also confirm the applicable thermal calculations or test reports for the intended environment.

The listed minimum order quantity is one set, with an indicated delivery period of seven days, and the company supports industry-trade integration. For a project-specific proposal or technical assistance, contact guizugroup@outlook.com.

About the Manufacturer

Guangdong Uni-House Technology Co., Ltd. operates as a foreign trade company under the Guizu Group. Its stated services cover design, research and development, manufacturing, installation, and after-sales support through multiple factories. Its product range includes detachable, expandable, and foldable container houses, prefab K houses, flat pack container houses, space capsule houses, and other modular building systems.

The company reports a team of 30 professional R&D engineers and designers, more than 10 advanced production lines, and 150 utility model patents. Its reported technical focus includes structural optimization, faster installation, and weather resistance. It also lists CE certification for relevant modular container house products and experience serving clients in several industries and regions.