Approving a plastic mold quotation requires more than comparing the quoted price. Before placing an order, verify the mold construction, steel grades, runner design, dimensional tolerance, expected service life, inspection plan, delivery schedule, production scope, minimum order quantity, and after-sales responsibilities. For custom plastic injection tooling, every listed specification should align with the part design, projected output, quality requirements, and overall manufacturing schedule.
A complete quotation should translate the product requirements into clear tooling and commercial terms. The following areas deserve particular attention before supplier approval:
Do not accept a quotation that identifies the tool only as a standard plastic mold. It should state the proposed mold base and cavity materials. Common options listed for this tooling include S50C or P20 for the mold base, and 718H, 1.2738, or S136 for the cavity steel. The supplier should also identify whether the mold will use a cold runner or hot runner system.
Steel selection affects wear resistance, corrosion resistance, polishing performance, maintenance requirements, and mold longevity. The runner choice influences material waste, cycle performance, part appearance, and tooling cost, so it should be confirmed against the part geometry and expected production volume.
The stated tolerance should be compared directly with the component drawing and critical dimensional requirements. The referenced tooling specification indicates a precision tolerance of ±0.02 mm. The quotation should explain how this tolerance will be verified and which features are included in the inspection report.
Ask the supplier to define the trial process, sample approval stages, dimensional inspection, and final inspection before shipment. Depending on the project, quality activities may include 3D inspection, first article inspection, complete dimensional measurement, CMM testing, surface checks, mold running tests, and multi-cycle mold trials. These details prevent disagreements about whether the quoted inspection applies to the mold, molded samples, or both.
Mold life has a direct effect on both the initial investment and the long-term cost per part. The listed service-life range is 50,000 to 1,000,000 shots. Rather than accepting a broad range, request the specific target for the proposed design and confirm how the selected steel, mold structure, cooling system, and maintenance plan support that target.
The supplier should also clarify whether the quotation covers prototype quantities, low-volume production, or continuous mass production. Longterm lists custom tooling for consumer electronics, home appliances, automotive components, industrial equipment, and everyday consumer products, allowing the mold design to be matched to different application requirements.
Delivery commitments should reflect the complexity of the tool and the required approval process. The available product information gives a general delivery period of 25–40 days, with a minimum order quantity of one mold set. Other schedules include 20–25 working days for a simple mold, 35–45 working days for a complex precision mold, or 25–35 days for tooling followed by mass production 7–15 days after sample approval.
Confirm when the delivery clock begins, whether design approval is included, and how revisions or delayed sample feedback affect the schedule. If injection molding is part of the service, the quotation should separate tooling delivery from production timing. Mass production quantities may be negotiable after the samples have been approved.
After-sales provisions should be documented rather than discussed only informally. Available support may include online technical assistance, mold maintenance instructions, spare-part supply, warranty repairs, and ongoing optimization for complex tooling. Clarify the warranty duration, covered failures, response time, responsibility for shipping, and process for approving replacement parts or modifications.
| Item to verify | Specification or service information |
|---|---|
| Mold materials and runner | S50C or P20 mold base; 718H, 1.2738, or S136 cavity steel; cold runner or hot runner options |
| Precision and service life | Quoted tolerance of ±0.02 mm; expected mold life from 50,000 to 1,000,000 shots |
| Order and delivery terms | MOQ of one set; standard delivery of 25–40 days, with alternative schedules based on tool complexity |
| Quality control | Trial molding, dimensional inspection, and complete pre-shipment inspection; some programs also include CMM and first article inspection |
| After-sales service | Online support, maintenance guidance, spare parts, warranty repair for applicable services, and mold optimization assistance |
| Production support | Tool development with injection molding; mass production MOQ negotiable, with production listed at 7–15 days after sample approval |
Reported project experience includes an electronic housing mold for an Italian manufacturer, a double-shot overmolding tool for a French product brand, a home appliance mold for a distributor in the United States, and an industrial plastic component mold for an Australian manufacturer. The reported project results emphasize dimensional accuracy, surface finish, mold alignment, consistent trial samples, technical issue resolution, and delivery according to schedule.
Longterm also lists ISO 9001:2015 certification for the design, manufacture, and sale of precision molds, as well as the sale of plastic products. The certificate number is 02825Q12549R0S, with applicability listed for global, European Union, United States, Australian, Italian, and French markets.
Which material details should a supplier include?
The quotation should name the mold base as S50C or P20 and specify the cavity steel as 718H, 1.2738, or S136. It should also identify the runner type and any required surface treatment, polishing standard, or dimensional condition.
What is the best way to confirm mold accuracy?
Match the quoted tolerance with the part drawing and identify the critical dimensions. The referenced specification gives a tolerance of ±0.02 mm. Also confirm trial molding, sample review, dimensional inspection, and full inspection before shipment.
Which commercial terms should be compared across suppliers?
Review mold life, MOQ, delivery time, inspection coverage, warranty conditions, technical support, and whether injection molding or mass production is included. A one-set mold order is supported, while production quantities can be negotiated after sample approval.
A plastic mold quotation is ready for approval only when the material grades, runner configuration, tolerance, mold-life target, inspection stages, delivery milestones, order quantity, and support obligations are clearly written. Longterm offers OEM custom plastic injection molds, mold making combined with injection molding, precision double-shot and overmolding tools, and mold development linked to mass production. Its ISO 9001:2015 certification and stated inspection procedures provide documented references for quality management.
For technical consultation or project support, contact us at rogerluo@longterm-mold.com.
Longterm Manufacturing Solutions Limited was established in 2010 and supplies mold design, tooling, precision machining, mold manufacturing, and plastic parts production for international customers. The company has 50 employees, designs and manufactures more than 300 molds each year, and serves markets in North America, Europe, and Australia. Its capabilities include injection molds, rapid prototyping, precision parts, and automated production solutions. The company holds ISO 9001:2015 certification and has experience serving customers across several industries.

REPORT