Plastic tooling payment should be tied to documented acceptance results rather than a visual review of trial parts. Before approving a payment milestone, confirm that the samples match the latest approved drawings, dimensional tolerances, appearance standards, assembly interfaces, and functional requirements. The mold should also demonstrate stable operation during the trial run, and all findings should be recorded in writing.
For Longterm's stated payment arrangement, the remaining 20% should be released only after T1 samples have been accepted and the required pre-shipment checks are complete. A signed sample approval, inspection records, trial documentation, and closed corrective actions provide the evidence needed for payment authorization.
Acceptance begins with a clear reference package. The drawing revision, 3D data, approved material, surface finish, color, tolerance requirements, and assembly conditions should all be identified before tooling production starts. Every later inspection result should be traceable to this agreed information.
For the listed custom plastic injection tooling, the stated precision tolerance is ±0.02 mm. The acceptance record should also identify the agreed mold construction, including S50C or P20 mold bases, 718H, 1.2738, or S136 cavity steel, and the selected cold-runner or hot-runner arrangement. The specified mold life of 50,000 to 1,000,000 shots should be recorded as part of the tooling configuration.
A sample should not be accepted solely because it looks correct. Request a complete dimensional inspection report showing each critical feature, the measured value, the required tolerance, the inspection method, and the final status. Measurement equipment and inspection conditions should be identified where the feature requires high precision.
In addition to individual dimensions, check mating surfaces, holes, clips, alignment features, gaps, and fit with the related components. Assembly trials can reveal problems that are not apparent in an isolated part, particularly for housings, multi-part products, and overmolded assemblies.
Visual acceptance should be based on an agreed reference sample and defined inspection conditions. Review the surface finish, color consistency, edges, weld lines, sink marks, short shots, flash, scratches, burn marks, flow marks, and other visible characteristics relevant to the product.
The approved sample confirmation should state whether the appearance is acceptable and should identify the viewing distance, lighting, surface area, and any agreed limits for cosmetic defects. This prevents different interpretations between the toolmaker and the customer after the trial.
The mold must produce acceptable parts consistently, not just one successful sample. Record the trial date, machine conditions, material, cycle time, temperature and pressure settings where relevant, number of cycles, ejection behavior, runner performance, and any adjustments made during the test.
For complex tooling, repeated-cycle trials can help confirm stability and part-to-part consistency. Longterm also lists CMM testing and multi-cycle mold trials among its inspection practices for high-precision, double-shot, and overmolding projects. These records are especially useful when the tooling will move into mass production.
Any deviation from the drawing, approved sample, or tooling specification should be listed in a formal deviation record. The record should explain the technical impact, identify the responsible party, set a corrective-action deadline, and state whether the deviation affects function, appearance, assembly, mold modification, or future production.
A sample with a minor deviation may be accepted only when the customer or designated technical authority reviews and approves it in writing. The signed approval should connect the sample to the drawing revision, inspection report, mold trial record, and corrective-action status. Undocumented exceptions should not be used as the basis for releasing payment.
| Acceptance area | Evidence required | Release condition |
|---|---|---|
| Dimensions and tolerances | Complete inspection report linked to the approved drawing and revision | All critical features comply, or deviations are formally approved |
| Appearance and finish | Signed reference sample and documented cosmetic inspection | Surface quality meets the agreed visual standard |
| Assembly and function | Fit checks, assembly results, and application-based functional tests | Parts perform correctly in the intended product configuration |
| Mold running performance | Trial report covering cycle stability, ejection, runners, and sample consistency | The mold runs reliably and produces approved parts |
| Tool construction | Confirmation of mold base, cavity steel, runner system, mold life, and other specifications | Delivered tooling matches the purchase agreement |
| Pre-shipment control | Full inspection report and corrective-action closure record | Required checks are complete before shipment-related payment |
| Payment milestone | Contract terms stating 50% with order, 30% after T1 samples, and 20% before shipment | Payment is released only after the applicable acceptance evidence is complete |
Which documents should be included with approved samples?
Request the current drawing revision, dimensional inspection report, mold trial record, signed sample approval, tooling specification sheet, assembly or functional test results, and corrective-action closure record when applicable.
Can payment be released when a sample has a small defect?
Only after the defect has been documented and reviewed by the authorized customer contact. Written approval should explain the defect's effect on product function, appearance, assembly, tooling changes, and future production. Unresolved critical issues should hold the relevant payment milestone.
When should the final 20% be paid?
Under the stated T/T terms, 50% is paid with the order, 30% after T1 samples, and 20% before shipment. The T1 milestone should follow documented sample acceptance. The final payment should follow completion of pre-shipment inspection and closure or formal approval of all agreed corrective actions.
The most dependable payment process combines objective inspection evidence with formal sample approval. Before releasing plastic tooling payment, confirm dimensions, appearance, assembly, functional performance, mold stability, tooling construction, and pre-shipment quality. Keep the drawing, trial report, inspection results, approved sample, and deviation records together so that the payment decision is traceable.
The product listing specifies a one-set minimum order, a 25-40 day delivery period, online technical support, mold maintenance guidance, and spare parts supply after delivery. Longterm's listed services include OEM custom plastic injection molds, custom mold making with injection molding, high-precision and double-shot tooling, and mold development with mass production. For technical solutions or support, contact rogerluo@longterm-mold.com.
Longterm Manufacturing Solutions Limited, also known as Longterm Mold, was established in 2010 and serves customers in North America, Europe, Australia, and other international markets. The company has 50 employees and provides mold design, tooling, precision machining, mold manufacturing, and plastic parts production. Its main offerings include injection molds, rapid prototyping and precision parts, and automated production solutions. Longterm holds ISO 9001:2015 certification and has supported customers across several industries.

REPORT