All Categories

Reliable Plastic Tooling Materials for High-Temperature Molding and Long Production Runs

VIP-User
2026-11-19

Selecting tooling for demanding molding conditions requires more than choosing a steel grade by name. The available mold steel choices are H13 and 718H, while S50C, P20, and 1.2738 are offered for the mold base. Because the product information does not state maximum working temperatures or comparative heat-resistance ratings, the final selection should be checked against the resin, processing parameters, cycle requirements, and expected mold life.

Available Tooling Options at a Glance

  • H13 and 718H are the listed choices for mold steel.
  • S50C, P20, and 1.2738 are available mold base materials.
  • Custom tooling can be produced with one cavity or multiple cavities.
  • The stated service range is 50,000 to 1,000,000 shots.
  • SPI and VDI finishes are available, with a hot runner offered as an option.

How to Evaluate Materials for Heat and Production Life

H13 and 718H appear in the product specification as the principal mold steel options. However, the supplied data does not identify a maximum operating temperature, thermal fatigue rating, or direct performance comparison between them. As a result, it would be premature to designate either grade as the better choice for every high-temperature application. The appropriate steel should be confirmed after reviewing the plastic resin, melt temperature, cooling conditions, molding cycle, and required dimensional stability.

The published mold-life range extends from 50,000 to 1,000,000 shots. This is a general stated range rather than a grade-specific guarantee. Actual service life can depend on the selected steel, cavity count, product geometry, abrasive or corrosive additives in the resin, maintenance schedule, and operating conditions. These factors should be included in the tooling quotation and design review.

Configuration, Finishing, and Quality Control

The tooling can be adapted to different production volumes through single-cavity or multi-cavity layouts. S50C, P20, and 1.2738 are listed as mold base alternatives, while SPI and VDI surface finishes support different appearance and texture requirements. A hot runner can also be specified when the project benefits from reduced runner waste or a more suitable filling arrangement.

Quality procedures include incoming material checks, mold trials, dimensional verification, and a final inspection before shipment. The company reports ISO 9001:2015 certification for the design, manufacture, and sale of precision molds, as well as the sale of plastic products. Reported project experience includes an Italian handheld-device housing mold and a French double-shot overmold for a consumer electronics shell, with attention to alignment, dimensions, and trial samples.

Specification Comparison

ItemAvailable choices or rangeConfirmed information
Mold steelH13, 718HListed steel grades; no temperature limits are published
Mold baseS50C, P20, 1.2738Available base-material options
Expected mold life50,000–1,000,000 shotsGeneral stated range without grade-specific figures
Cavity arrangementSingle or multi-cavityBoth configurations can be requested
Finishing and runner optionsSPI, VDI, optional hot runnerSurface textures and runner system can be configured

Frequently Asked Questions

Are H13 and 718H confirmed for a specific high-temperature process?

They are the mold steel options identified in the product data, but no operating-temperature ratings or comparative test results are provided. Confirm the suitable grade with the supplier based on the resin and molding conditions.

How long can the tooling be expected to operate?

The stated mold-life range is 50,000 to 1,000,000 shots. The available information does not connect a particular service-life figure to a steel grade, cavity design, or application.

Can the tooling be customized for production volume and appearance?

Yes. Available choices include single- or multi-cavity tooling, S50C, P20, or 1.2738 mold bases, SPI or VDI finishes, and an optional hot runner. The listed MOQ is one set, with a quoted delivery period of 20–35 days.

Conclusion

For plastic molding projects involving elevated temperatures or extended production, H13 and 718H provide the listed mold steel choices, while S50C, P20, and 1.2738 are available for the mold base. The published information supports a general tooling-life range of 50,000 to 1,000,000 shots, but it does not provide temperature ceilings or steel-specific durability data. Material selection should therefore be finalized using the resin specification, operating conditions, cavity requirements, and target production volume. Longterm provides custom mold design, tooling, and injection molding services. Technical inquiries can be directed to rogerluo@longterm-mold.com.

About Longterm

Longterm Manufacturing Solutions Limited was established in 2010 and serves international customers with mold design, tooling, precision machining, mold manufacturing, and plastic parts production. The company reports a 2,000-square-meter facility and a workforce of approximately 50 employees. Its ISO 9001:2015 certification covers precision mold design, manufacturing, and sales, while reported projects include consumer electronics, home appliances, and industrial equipment.

Longterm Manufacturing Solutions Limited logo

REPORT

Code
Choose a different language
Current language: