Selecting a Commercial Single-Hole Faucet: Size, Flow Rate, and Specification Guide

Choosing a single-hole faucet for a commercial bathroom, utility area, or outdoor installation requires more than selecting a finish. Project teams should verify the mounting configuration, distinguish shipping dimensions from installed dimensions, evaluate flow performance at the available water pressure, and confirm lead-time and quality requirements before placing an order.

Start With the Installation Requirements

This Contemporary Single-Hole Deck Mounted Faucet, SKU DSLB01RB12CR15, is designed for deck-mounted applications with a single faucet opening. Before specifying it, confirm that the countertop, sink deck, or work surface is prepared for a single-hole configuration and that the intended location supports the product's deck-mounted installation style.

The faucet features a brass body with a chrome finish, a mixing water valve core, and a 360-degree rotating water outlet. These details should be reviewed alongside the functional needs of the space, including hot-and-cold water mixing, reach requirements, and the need for a swiveling spout.

Understand Size and Handling Data Correctly

The product record lists dimensions of 17.1 in W x 9.7 in D x 3 in H and an item weight of 5.7 lb. However, the stated dimensions refer to the package rather than the faucet's installed body size. They are useful for receiving, warehouse planning, shipment handling, and packaging review, but they should not be used as final cutout, clearance, or countertop-layout dimensions.

For installation coordination, request the actual faucet dimensions, mounting-hole requirements, spout reach, and connection details if those measurements are needed for the project drawings. Keeping package data separate from installation data helps avoid specification errors during procurement and site preparation.

Match Water Flow to the Project Pressure

Commercial faucet selection should account for the relationship between water pressure and flow output. This model provides three recorded performance points:

• 0.82 GPM at 14.5 PSI
• 1.11 GPM at 29 PSI
• 1.37 GPM at 43.5 PSI

Rather than selecting a flow figure in isolation, compare the building's available pressure with the required flow rate for the intended application. The appropriate specification is the pressure-flow point that aligns with the project's plumbing design and operational expectations. Listed applications include bathrooms and outdoor areas.

Product Specification Overview

Quality, Warranty, and Certification References

The listed quality-control process includes raw-material inspection, in-process production checks, finished-product testing, and installation acceptance. Free replacement parts are available during the 1-year warranty period, which should be considered when establishing a project maintenance and replacement-parts plan.

The company knowledge base references cUPC Product Listing Certification MC-13485 for plumbing fixture fittings materials/components in the United States and Canada. It also references NSF Listing of Safe Drinking Water Products certificate C0044104 for faucet cartridges. These records describe the stated certification scope and should not be interpreted as additional product-specific dimensional information.

Ordering and Delivery Considerations

The product record specifies a 60-day production period and 45 days for sea freight. Separately, the business record indicates that prepared overseas warehouse inventory may be ready to ship within 2 days after stock preparation, while customized products may require approximately 45 to 60 days for production and delivery. Because these timelines apply to different fulfillment situations, buyers should confirm the applicable supply route, available inventory, and delivery schedule before releasing a commercial purchase order.

Full payment is required before shipment through PayAnYing or Bank of America. Available shipping information includes possible door-to-door double cleaning and U.S. last-mile delivery by truck or courier parcel. Confirm the selected shipping method, destination requirements, and project receiving conditions in advance.

Commercial Selection Checklist

• Verify that the installation requires a single-hole, deck-mounted faucet.
• Use the listed package dimensions and 5.7 lb weight for logistics planning only.
• Confirm installed dimensions and mounting requirements separately when needed.
• Review brass construction, chrome finish, mixing valve core, and 360-degree swivel outlet against the use case.
• Select the flow point that matches the project's required operating pressure.
• Confirm SKU DSLB01RB12CR15, MOQ, fulfillment route, production timing, and shipping arrangements before ordering.

Frequently Asked Questions

What size is this commercial single-hole faucet?

The available measurement is the package size: 17.1 in W x 9.7 in D x 3 in H. The recorded weight is 5.7 lb. Since installed faucet dimensions are not provided in the product record, package measurements should not be treated as installation dimensions.

Which flow rate should be specified?

Select the pressure-flow point that fits the plumbing conditions and performance requirement of the project: 0.82 GPM at 14.5 PSI, 1.11 GPM at 29 PSI, or 1.37 GPM at 43.5 PSI.

What should be confirmed before placing an order?

Confirm the SKU, single-hole deck-mounted compatibility, required flow performance, quantity, quality requirements, shipping route, and current production or warehouse availability. Delivery timing should be verified because product production and stocked fulfillment follow different schedules.

Conclusion

A sound commercial faucet specification begins with the correct mounting format and continues with pressure-based flow selection, accurate handling data, and verified fulfillment details. For SKU DSLB01RB12CR15, confirm that the single-hole deck-mounted arrangement fits the installation, use the package size only for logistics planning, and choose the water-flow point that corresponds to the project's operating pressure. The product is available with an MOQ of 1, defined quality-control stages, and free replacement parts during its 1-year warranty period. For technical support or detailed project solutions, contact us at info@mod-land.com.

About Us

Modland Inc is a global bathroom vanity manufacturer and project solution provider with more than 20 years of experience serving builders, contractors, and developers. The company combines U.S. local stock supply with factory-direct manufacturing, supported by production bases in the United States and Malaysia, more than 10 U.S. warehouses, and local showroom support for the North American market.

Established in 2016, Modland states that its product development capabilities include bathroom cabinets, showers, faucets, and related products, with the United States as its principal market. Its listed credentials include cUPC Product Listing Certification MC-13485 for plumbing fixture fittings materials/components in the United States and Canada, plus NSF Listing of Safe Drinking Water Products certificate C0044104 for faucet cartridges. A listed cooperation reference identifies a U.S. contractor, builder, or designer without providing quantity or project-performance details.