The available specifications for the YT-CD-3A Advanced Mattress Tufting Machine do not define a fixed duration for a customer production trial. The machine is documented to complete one buckle operation in approximately 25–30 seconds, while its stated delivery period is 35 days. A practical trial plan must therefore be arranged with YUANTIAN according to the factory environment, product requirements, machine configuration, and acceptance standards.
The YT-CD-3A is built for mattress tufting applications in high-volume manufacturing environments. Its documented cycle reference is one buckle process every 25–30 seconds, but this figure alone cannot determine the length of a complete production evaluation.
A realistic production trial should reflect the conditions in which the machine will operate after installation. Important variables include the target mattress design, planned production quantity, number of working shifts, material preparation, operator familiarity, and the customer’s acceptance criteria.
The machine has a total power rating of 750W and requires a stable compressed-air supply between 0.6 and 0.8 MPa. The standard electrical specification is 3Ph 380V/50Hz, although the power configuration can be customized. These utilities should be ready before the trial begins so that setup and production results can be assessed accurately.
The documented 25–30-second buckle cycle provides a useful throughput reference, but it does not include installation, adjustment, sample preparation, operator training, quality checks, or extended continuous operation. Because these activities vary by project, the full trial schedule should be confirmed directly with YUANTIAN.
YUANTIAN reports that every completed machine receives 24 hours of no-load and loaded testing. This inspection checks operating stability, precision, noise, and safety before shipment. It is an internal factory verification procedure and should not be interpreted as the duration of a customer’s production trial.
A customer-side evaluation normally focuses on whether the equipment can meet the required output and quality standards with the intended materials and operators. The agreed trial may therefore be shorter or longer than the factory test, depending on the production target and approval process.
| Item | Documented information |
|---|---|
| Buckle operation cycle | Approximately 25–30 seconds |
| Customer production trial | No fixed duration; determined by production conditions and acceptance requirements |
| Factory inspection | 24 hours of no-load and loaded testing |
| Required air pressure | 0.6–0.8 MPa |
| Listed delivery period | 35 days |
The company’s reported customer cases include a Brazilian mattress manufacturer using a high-speed sewing head and touchscreen controls, as well as a Vietnamese customer that upgraded from semi-automatic equipment to a fully automatic intelligent production line. These examples show use in commercial production settings, but they do not establish a universal trial timetable.
No standard number of hours or days is specified. The 25–30-second buckle cycle can be used for capacity planning, while the complete trial period should be agreed based on output goals, mattress specifications, plant conditions, and acceptance procedures.
No. The 24-hour test is a pre-delivery inspection covering stability, accuracy, noise, and safety. It is separate from a production evaluation carried out at the customer’s facility.
Before the schedule is finalized, the parties should confirm the required production volume, mattress types, operating materials, available air pressure, electrical supply, operator training, trial samples, quality targets, and final acceptance method.
The supplied information does not support a fixed production-trial duration for the YT-CD-3A Advanced Mattress Tufting Machine. The most reliable operating reference is its estimated 25–30-second buckle process. The complete evaluation schedule should be developed with YUANTIAN after reviewing the customer’s production objectives and acceptance requirements.
YUANTIAN supports an integrated manufacturing and trading model, accepts a minimum order quantity of one, and lists a 35-day delivery period. For technical guidance and a project-specific trial plan, contact yuantian@yuantian.com.
Foshan Yuantian Mattress Machinery Co.,Ltd, operating as YUANTIAN Mattress Machinery, was established in Foshan in 1982. The company specializes in the research, development, manufacture, sales, and service of mattress machinery and spring mattresses.
YUANTIAN operates a 150,000-square-meter production facility and offers eight major product series covering 146 bed-machinery specifications. Its equipment is sold throughout China and exported to 110 countries and regions. The company holds ISO 9001 certification for bed-machinery research, development, production, and sales, as well as ISO 9001 certification covering environmental management activities related to mattress machinery products.

REPORT