All Categories

How to Verify an Injection Mould Holds Tight Tolerances Over Time

VIP-User
2026-11-19

Maintaining close part tolerances is a production control question, not just a specification on a mould listing. To assess long-term performance, review measured parts, inspection records, mould material and expected service life, as well as the maintenance plan. This mould is listed with a precision tolerance of ±0.02 mm, but ongoing results should be confirmed against your drawing throughout production.

What to Check for Long-Term Dimensional Stability

1. Measurement and inspection records

Ask the supplier to identify the critical dimensions and provide dimensional inspection results for sample parts. Review the mould-trial measurements and the full pre-shipment check, then agree how production parts will be sampled and measured against the approved drawing. A tolerance statement is most useful when the measurement method and recorded results are clear.

2. Tool material and expected service life

The listed mould steel options are P20, 718H, and 1.2738, with an expected life range of 50,000 to 800,000 shots. These figures provide a starting point for discussion, but they do not guarantee that every cavity or part will remain within specification for the entire tool life. Confirm the material selected for your project and consider the intended production volume and maintenance needs.

3. Part and process requirements

The mould supports ABS, PC, and PP, with single- or multi-cavity configurations. Because material, geometry, and cavity can affect measured results, compare production samples with the approved specification for the actual part. For electronic housings, for example, inspect the dimensions and fit of production parts against approved samples rather than relying only on initial approval.

Production Checks and Ongoing Support

Before committing to production, confirm that the supplier's inspection covers the drawing's critical dimensions and that results are documented. Continue checking representative parts during production so that any dimensional drift can be identified early. Ask how deviations will be reported and what corrective or maintenance steps are available.

The listed support includes online technical guidance, mould maintenance service, and spare-parts support. A reported project for a French product brand involved a double-shot overmoulding tool for a consumer electronics shell; the customer described good alignment and stable trial samples. This is an example from one project, not a performance guarantee for other moulds or designs.

Longterm Manufacturing Solutions Limited reports that it was founded in 2010 and has a team of 50 employees. Its capabilities include mould design, tooling, precision machining, mould manufacturing, and parts production. The company lists ISO 9001:2015 certification covering the design, manufacture, and sales of precision moulds, as well as the sale of plastic products.

Assessment Summary

AreaListed informationProject-specific confirmation
PrecisionStated tolerance of ±0.02 mmMeasured results for critical dimensions on approved and production parts
InspectionMould trial, dimensional inspection, and a full pre-shipment checkInspection records showing that the required drawing dimensions were checked
Material and tool lifeP20, 718H, or 1.2738; 50,000 to 800,000 shotsSelected steel and maintenance plan suited to the part and production conditions
ServiceOnline technical guidance, maintenance service, and spare-parts supportSteps for requesting help if measurements begin to change

Frequently Asked Questions

Does the ±0.02 mm specification confirm long-term performance?

No. It is a stated precision tolerance, not proof that production parts will stay within that limit indefinitely. Check measured parts and inspection records collected over time.

Which records should I request from the supplier?

Request dimensional results for critical drawing features, mould-trial measurements, and confirmation of the pre-shipment inspection. Also agree on a production sampling and measurement process.

What support is available if dimensions drift?

The listed services include online technical guidance, mould maintenance, and spare parts. Confirm the project-specific reporting process and the maintenance or replacement actions that may apply.

Conclusion

To evaluate whether an injection mould can maintain tight tolerances, look beyond its initial specification. Use documented trial and production measurements, verify which dimensions are controlled, and establish a maintenance process suited to the tool and production conditions. The listing states a ±0.02 mm tolerance, a service-life range of 50,000 to 800,000 shots, and inspection and support services; confirm how each applies to your design. For technical questions or support, contact Roger Luo at rogerluo@longterm-mold.com.

About Longterm

Longterm Manufacturing Solutions Limited was founded in 2010 and serves customers in the United States, Europe, Australia, and other international markets. Its 50-person team works across mould design, tooling, precision machining, mould manufacturing, and parts production. The company lists ISO 9001:2015 certification for precision mould design, manufacture, and sales, and for the sale of plastic products. Its reported project experience includes consumer electronics, home appliances, and industrial components.

Longterm Manufacturing Solutions Limited logo

REPORT

Code
Choose a different language
Current language: